Metal Deck In Stock. Same Day Shipping.

Parker Punch Tool

Parker Punch Tool

The Ultimate Air Powered Button Punch Tool - A Must Have!

$ 1,995.00 Parker Punch Tool
$ 100.00 UPS Ground Freight Within U.S.
$ 2095.00 Total
Ask About Multi Tool Discounts


The PARKER PUNCH is a fast, high-volume pneumatic button punch that can save you time while providing strong, high quality punches. With just one tool, the PARKER PUNCH gives you the ability to punch all types of decking, from the heavy duty 18 gauge to the lighter weight 22 gauge. The PARKER PUNCH is designed to solve the problems associated with manual button punches, while simultaneously slashing labor cost and boosting productivity. How? The PARKER PUNCH will produce an average 1,200 punches per hour, hour after hour, for as long as you can squeeze the trigger. Imagine doing 9,600 punches in a standard work day without operator fatigue! And the revolutionary, unique crimping action and 3 punching pins virtually eliminate bust-outs. The PARKER PUNCH provides safe, consistent button punching that passes inspection time after time. So take the next step toward cranking up to volume on your job - talk to the people at Western Deck today. Manufactured with pride in the USA.

    • BUTTON PUNCHING can be performed with minimum effort on the part of the operator.
    • POWERFUL JAWS with 3 PUNCHING PINS provides a strong unique crimping action of deck lap.
    • CRIMPING AND PUNCHING of side lap seams is always uniform regardless of the operator's size or strength.
    • QUICK ADJUSTABLE ACTUATOR ARM allows the operator to keep the jaws adjusted to the proper gap with a twist of the wrist.
    • QUICK EXHAUST AIR VALVE rapidly returns air pod for speed in operation.
    • POWDER COATED rugged STEEL FRAME ensures long life of the tool under the worst job conditions

PARKER PUNCH SPECIFICATION

Model Number

BP 3-3N

Height

39"

Width

16.5"

Diameter

9"

Capacity

3" Deep, 18 gauge

Air Inlet NPT

1/4"

Minimum Hose Size

3/8"

Minimum Air Supply

4cfm

Pressure Required

100 psi Maximum

Cycle Time

2 Second

Cycles Per Minute

20 Average

Shipping Weight

40 Pounds


Click here to purchase the Parker Punch Tool.

You May Also Be Interested In These Products:

Real Rusted Roofing
Rusted Roofing is produced in two different finishes: A606-4 (aka Corten) or Bare steel. Available panels include corrugated, standing seam, R-Panel, flush wall & more.
Painted Rusted Roofing
We are the leading provider of painted metal roofing panels designed to look like real rusted roofing without the rust stains. Learn more.
Painted Products That Look Weathered Galvanized
Painted metal roofing and siding that looks like an old dull gray and weathered galvanized roof. Many styles and finishes to choose from.
Painted Products That Look Like Patina'd Copper
Why pay for an expensive copper roof? Metal roofing and siding that has been pre-painted to look like patina'd copper is a growing favorite among architects and builders.
Vari-Cool®
VARI-Cool Color Changing Paint System. This Exotic Paint System Is Unlike Anything You Have Ever Seen. 17 Different Colors - Request A Color Chip.
Metal Carports
Heavy duty inexpensive DIY metal carports and RV shelters. Large selection of shelters and carports for all of your storage needs. Route trucks servicing the entire country.
Metal Deck
Roof deck and floor deck in stock. Huge selection of gauges, lengths, and metal decking profiles. Immediate availability. Buy Now.
Galvanized Square Tubes
Galvanized square tube in stock in 14 gauge at many different lengths. Galvanized tube used for metal fence posts, metal carports, deck posts, panic bar gates, or building supports.
Button Punch Tool
Button Punch Tool
Button punch tool available for button punching or crimping seams of metal deck for easier welding. Purchase today.
Shop now
Cell Closures
Cell Closures
Cell closure will close off the open ends of metal floor deck. This will prevent concrete spilling through ends of the metal deck. Available in 20 Gauge, Galvanized at 1.5" X 1.5", 1" X 2", 1" X 3"
Shop now
Edge Form/Pour Stop
Edge Form/Pour Stop
These formed galvanized angles are used to create a stopping point for poured concrete. Edge form and pour stop immediate availability and delivery. 16 Gauge, galvanized in stock. Custom sizes and...
Shop now
Shop Drawings
Shop Drawings
We are ready to provide shop drawings services and metal deck packages for your next project.
Shop now
Metal Deck Fasteners
Metal Deck Fasteners
Shop metal deck screws, fasteners, and impax self-drilling fasteners for metal decking installation and applications.
Shop now
Call Us!
Request A Quote
Request A Color Chip