Foam Closures For Metal Decking

Foam plugs and foam closure strips for metal decking are used to close off the ends of the decking.

Metal Deck Foam Closures

Not the right type of Metal Decking Accessory? We offer a wide range of options.

View our accessories here

Steel Decking Foam Closures

Foam Closures For Metal Deck

Foam closures and individual foam plugs are used at the ends of the metal decking panels. They will reduce light intrusion and prevent birds and bugs from getting through highs of the panels. Foam closures are available for the inside and outside of the steel decking panels.

B Deck - Inside, Individual Foam Plugs

300 Pieces Per Box
150 Linear Feet Of Coverage
For Use With 1.5" B Deck

B Deck - Inside, 36" Foam Closure Strips

100 Pieces Per Box
36" Wide
300 Linear Feet Of Coverage
For Use With 1.5" B Deck

B Deck - Outside, 36" Foam Closure Strips

100 Pieces Per Box
36" Wide
300 Linear Feet Of Coverage
For Use With 1.5" B Deck

W2 Formlok - Inside, Individual Foam Plugs

100 Pieces Per Box
100 Linear Feet Of Coverage
For Use With 2" Floor Deck

W3 Formlok - Inside, Individual Foam Plugs

100 Pieces Per Box
100 Linear Feet Of Coverage
For Use With 3" Floor Deck

N Deck - Inside, Individual Foam Plugs

100 Pieces Per Box
67 Linear Feet Of Coverage
For Use With 3" N Decking

N Deck - Outside, 36" Foam Closure Strips

100 Pieces Per Box
200 Linear Feet Of Coverage
For Use With 3" N Decking

Deep Vercor - Inside/Outside, 36" Foam Closure Strips

100 Pieces Per Box
300 Linear Feet Of Coverage
Can Be Used On Both Inside And Outside Of Panel
For Use With 1 5/16" Form Deck

HSN3-32 - Inside, Individual Foam Plugs

100 Pieces Per Box
150 Linear Feet Of Coverage
For Use With 3" HSN3-32

Don't forget the accessories!

RELATED PRODUCTS

Every metal deck project requires additional accessories. Get everything you need all in one place, here at Metaldeck.com

Cell Closure

Cell closure will close off the open ends of metal floor deck. This will prevent concrete spilling through ends of the metal deck. Available in 20 Gauge, Galvanized at 1.5" X 1.5", 1" X 2", 1" X 3"

Fasteners

Metal deck is normally welded or pinned to the steel. However, you can still need screws in canopy applications and for stitch screw side lap decking.

Button Punch Tool

Button punch tool available for button punching or crimping seams of metal deck for easier welding.

Buy
Rent
Free Loaner Tool With Metal Deck Purchase

Parker Punch Tool

The Parker Punch is a fast, high-volume pneumatic button punch that can save you time while providing strong, high-quality punches.