Metal Decking
Back to Main

PLB-36 Metal Roof Deck: 1.5" Punchlok II

The difference between the PLB-36 profile and HSB-36 profile is the method of sidelap attachment. You will need to use a Punchlok II tool for the sidelap attachment. Loaner tools will be provided with the purchase of Punchlok II metal decking. Same day pick up or next day delivery.

How To Get A Punchlok II Tool For Verco And Vulcraft Metal Decking

B Deck - Verco Punchlok II

PLB-36™ - 1.5" Deep

PLB-36 and HSB-36 panels are identical in both geometry and material properties. The prefix "PL" designates a PunchLok II version of the B profile, while "HS" (high shear) indicates a top seam weld, button punch, or screw version of the same profile. When the job is specified as Punchlok II, then a Punchlok II tool must be used for the sidelap attachment. This method of attachment allows for higher shear values and must be done correctly or the building design could fail. 

PLB-36 is good in stock in the following gauges 22, 20, 18, 16 Gauge.

Immediate availability of Punclok II roof deck in lengths ranging from 6'-2" to 35'-6". Verco PLB-36 can be custom run to longer lengths if needed.

  • Pick Up Locations in Ontario, California and Phoenix, Arizona
  • Delivery Is Available Throughout The USA
Don't forget the accessories!

RELATED PRODUCTS

Every metal deck project requires additional accessories. Get everything you need all in one place, here at Metaldeck.com

Image

Foam Closures

Prevents moisture, insects, and light from getting inside or beneath the raised portions of metal decking panels.

  • Individual Foam Plugs
  • Foam Closure Strips

View Product

Image

Fasteners

Metal deck is normally welded or pinned to the steel. However, you can still need screws in canopy applications and for stitch screw side lap decking.

View Product

Image

Button Punch Tool

Button punch tool available for button punching or crimping seams of metal deck for easier welding. 

  • Buy
  • Rent
  • Free Loaner Tool With Metal Deck Purchase

View Product

Image

Parker Punch Tool

The Parker Punch is a fast, high-volume pneumatic button punch that can save you time while providing strong, high-quality punches. 

View Product

shop-drawings-roof-deck
Shop Drawings & Metal Deck Packages Available

Shop Drawings

We are ready to provide you with shop drawings and metal deck packages for your next project. We can provide shop drawings that would include CAD drawings, metal deck cut list, gauge edge form, and shear stud layout.

Learn More

shop-drawings-roof-deck
The Metal Deck Learning Center

Everything You Should Know About Metal Decking.

Learn more about metal decking and what it's used for. From instructional videos to informative articles, you're sure to find the answers you're looking for when it comes to roof deck and floor deck.