Metal Decking
Back to Main

PLN-24 Metal Roof Deck: 3" Punchlok II

The difference between the PLN-24™ profile and N-24 profile is the method of sidelap attachment; the panels themselves are identical in both geometry and material properties. The prefix "PL" designates a PunchLok® II version of the N profile, while N alone indicates a top seam weld or button punch version of the same profile. Same day pick up or next day delivery.

Looking For Metal Floor Deck? We Offer A Variety Of Gauges, Lengths, and Depths.

Verco Punchlok II PLN-24

PLN-24 Roof Deck - 3" Deep

PLN-24 profiles are 3-inch deep structural roof deck that provide both vertical load and diaphragm shear capacity. The profile contains 3 ribs and is 24 inches wide with male and female edges, creating an interlocking side lap when installed. The 3-inch deep ribs make N deck ideal for longer span conditions where B deck falls short. N deck is typically used for span conditions greater than 10 feet or a specific aesthetic look. The narrow low flutes and wide high flutes of N Deck create a very uniform look from the bottom side.

PLN-24 Deck is 3" deep and is available in galvanized and prime painted finishes. N Deck is good in stock in the following gauges 20, 18, 16 Gauge.

Immediate availability of Verco PLN-24 Deck roof decking in lengths ranging from 20'-6" to 35'-6". Verco PLN-24 Deck material can be custom run to longer or shorter lengths if needed.

  • Pick Up Locations in Ontario, California and Phoenix, Arizona
  • Delivery Is Available Throughout The USA
Don't forget the accessories!

RELATED PRODUCTS

Every metal deck project requires additional accessories. Get everything you need all in one place, here at Metaldeck.com

Image

Foam Closures

Prevents moisture, insects, and light from getting inside or beneath the raised portions of metal decking panels.

  • Individual Foam Plugs
  • Foam Closure Strips

View Product

Image

Fasteners

Metal deck is normally welded or pinned to the steel. However, you can still need screws in canopy applications and for stitch screw side lap decking.

View Product

Image

Button Punch Tool

Button punch tool available for button punching or crimping seams of metal deck for easier welding. 

  • Buy
  • Rent
  • Free Loaner Tool With Metal Deck Purchase

View Product

Image

Parker Punch Tool

The Parker Punch is a fast, high-volume pneumatic button punch that can save you time while providing strong, high-quality punches. 

View Product

Shop Drawings & Metal Deck Packages Available

Shop Drawings

We are ready to provide you with shop drawings and metal deck packages for your next project. We can provide shop drawings that would include CAD drawings, metal deck cut list, gauge edge form, and shear stud layout.

Learn More

shop-drawings-roof-deck
The Metal Deck Learning Center

Everything You Should Know About Metal Decking.

Learn more about metal decking and what it's used for. From instructional videos to informative articles, you're sure to find the answers you're looking for when it comes to roof deck and floor deck.