Metal Deck In Stock. Same Day Shipping.

Design Span®hp
With or Without Striations

Design Span®HP

Available Options:

    • STRIATIONS AVAILABLE AS STANDARD OFFERING ON 16", 17", & 18" PANELS. No Additional Cost.
    • Optional Wide Batten Cap Is Available. Additional Cost.

Design Span®hp is a performance-rated structural standing seam metal roof system with net coverage of 12", 16", 17", & 18". Design Span®hp is excellent as a roof over metal or wood decking, and as a fascia or mansard over plywood or supports.

Features & Benefits

    • Subtle striations between ribs on 16" and wider panels reduce the appearance of oil-canning.
    • Available in 24 and 22 gauge in a variety of standard colors in the DuraTech®5000 and Dura Tech™ mx (polyvinylidene flouride) coating systems, including ZACtique®II or bare Zincalume® Plus.
    • Tested in accordance with UL580 & ASTM E1592.
    • AEP Span Design Span HP Meets UL 90 wind uplift requirement for all panel widths.
    • Has been tested for air infiltration per ASTM E1680, and water infiltration per ASTM E1646.
    • Design Span HP panel assemblies are Class A Fire Rated when installed on non-combustible deck or framing per IBC or IRC. Panel assemblies are also Class A Fire Rated per UL790 when installed in accordance to UL listings. Refer to UL Listings & Specifications for information.
    • Design Span HP can be installed over solid substrates or spaced support members at spans up to 4'-0".
    • Factory notching available for turn under at the eave (some limitations apply).
    • Notch provides a clean detail and reduction in labor.
    • Factory applied sealant is standard.
    • Snap-together panel, no field seaming required.
    • Wide batten cap available for a bold appearance.
    • Recommended minimum slope of 2:12. Inquire for slopes below 2:12.
    • AEP Span Design Span HP manufactured in Fontana, CA and Tacoma, WA.
    • Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection.
    • 18" optional, additional charges and lead times apply.

Design Span HP is available in painted or Zincalume® finishes.

AEP Span Design Span HP can be shipped anywhere in the country very inexpensively on one of our route trucks. Please click Request a Quote above or Call 877-787-5467 for immediate assistance.

You May Also Be Interested In These Products:

Real Rusted Roofing
Rusted Roofing is produced in two different finishes: A606-4 (aka Corten) or Bare steel. Available panels include corrugated, standing seam, R-Panel, flush wall & more.
Painted Rusted Roofing
We are the leading provider of painted metal roofing panels designed to look like real rusted roofing without the rust stains. Learn more.
Painted Products That Look Weathered Galvanized
Painted metal roofing and siding that looks like an old dull gray and weathered galvanized roof. Many styles and finishes to choose from.
Painted Products That Look Like Patina'd Copper
Why pay for an expensive copper roof? Metal roofing and siding that has been pre-painted to look like patina'd copper is a growing favorite among architects and builders.
Vari-Cool®
VARI-Cool Color Changing Paint System. This Exotic Paint System Is Unlike Anything You Have Ever Seen. 17 Different Colors - Request A Color Chip.
Metal Carports
Heavy duty inexpensive DIY metal carports and RV shelters. Large selection of shelters and carports for all of your storage needs. Route trucks servicing the entire country.
Metal Deck
Roof deck and floor deck in stock. Huge selection of gauges, lengths, and metal decking profiles. Immediate availability. Buy Now.
Galvanized Square Tubes
Galvanized square tube in stock in 14 gauge at many different lengths. Galvanized tube used for metal fence posts, metal carports, deck posts, panic bar gates, or building supports.
Metal Purlins and Channel
Metal Purlins and Channel
Cee and Zee Purlins. Galvanized and Prime Painted.
Shop now
AEP Span Flat Sheets/Coil
AEP Span Flat Sheets/Coil
Coil and Flat sheets can be processed to any width or length. Shop our huge selection of different gauges and widths.
Shop now
Metal Roofing Fasteners
Metal Roofing Fasteners
Self-drilling metal roofing fasteners, rivets, and clips available. All types. Metal to Wood and Metal to Metal. Painted and Galvanized.
Shop now
Butyl/Sealant Tape
Butyl/Sealant Tape
Use sealant tape at the panel laps for metal roofs to increase weather tightness. Order yours today.
Shop now
Pipe Flashings
Pipe Flashings
We offer a wide range of pipe flashings in both square and round. Shop now.
Shop now
Galvanized Square Tubes
Galvanized Square Tubes
Available in 4" square sizes and lengths of 10', 12', 14’, 16’, 18’, 20’, and 24'. Learn more.
Shop now
Call Us!
Request A Quote
Request A Color Chip